Ver1.4
1. I changed PAPI from MSFS default to real life.
RWY02 PAPI 3.0→5.3degrees
RWY20 PAPI 3.6→5.0Degrees
2 I built a house just before landing.
(I added the 2 3 4 th photo of Ver1.4.)
I had a question.
Q I'm not sure if this is a replacement or an enhancement.?
A This scenery must be used with the ASOBO version.
Q Is this compatible with the Asobo Version, or is it to install it instead of the Asobo version?
A Compatible with ASOBO version. I'm just modifying the asobo version.
I (KAZE) am a foreigner and do not understand English, so I am using translation software.
Toncontin is the most difficult airport in the world for landing jet planes.
It is difficult because the hill just before landing is high and it is necessary to fly just above the ground.
The default Toncontin had some strange parts, so I fixed it and made it realistic.
The runway has a slope of 20M, just like in reality. RWY 02 is 1005M, RWY 20 is 985M.
In 2006, a video of Toncontin's landing with a woman's voice saying, "Don't be surprised" was posted on YouTube, and I was very moved by it.↓
https://www.youtube.com/watch?v=v_z5HtME9n8&ab_channel=RoySchachter
At that time, the runway at Toncontin was RWY01, not RWY02, and the runway was 300M shorter than it is now. Due to an accident in which the tire of an airplane came into contact with the roof of a car running on the road before landing.
There were traffic lights on the road, and it was impressive to see the road turn red when a plane landing, and cars waiting at the traffic lights.
That road is currently under RYW02.
Also, around 2008, there was an accident in which a jet plane overran, and there was a period when dangerous jet planes were prohibited from entering the area.
The main attraction of Toncontin is that it is the most difficult flight in the world to land on RWY02 on an A320.. However, if the scenery is flat , We will be very boring.
The ground needs to have undulations similar to reality. In fact, from the final flight to landing, airplanes fly for long periods of time, very close to the ground.
When you look out the window of an airplane, it looks like you're on a high-speed train as it flies on the ground.
It is only when this is recreated that Toncontin's landing becomes attractive.
Toncontin Airport is recorded as a handmade airport by default in MSFS, but undulations are not accurate.
Therefore I wanted to fix this.
This is a video taken from inside the plane of the landing that I used as a reference. ↓
https://www.youtube.com/watch?v=5WoSZFnBMPk&ab_channel=ShadiaMej%C3%ADa
I do really like your works ,
much appreciated
1 months ago
andmusic
1 months ago
flightsim2
2 months ago
2 months ago
KAZE
inno710
2 months ago
Corsair777
AIPを確認していなかったのでDefault3度のままでのPlanでApproachしていました。
これでBase Turn~Final付近でお尻がムズムズする感じがなくなりました。
でもやはりFinal Path 5度のApproachは高いですね!
引続き作品製作続けて頂けるようで喜んでおります!!
2 months ago
2 months ago
KAZE
katsuoji65
2 months ago
RafKDT
2 months ago
2 months ago
KAZE
abc331
2 months ago
ARussianSpy
3 months ago
charliebravoAT
3 months ago
3 months ago
KAZE
charliebravoAT
3 months ago
3 months ago
KAZE
lh1502
Great Scenery!! I appreciate your work and contribution!
I would like to ask for your help. When I operate either jetway at Gate 2 or 3, they do not move to the aircraft door. With both, they move just a bit, the entry portions rotate toward the aircraft, unfold the topcover, and stop - well outside the aircraft ground boundaries.
They appear to have moved and connected perfectly in your photos. I am using the PMDG 737 and GSX. I tried repositioning the AC at the gate with GSX and it made no difference.
Thank you for any recommendation!
4 months ago
4 months ago
KAZE
browns11
5 months ago
juanclatino
6 months ago
4 months ago
KAZE
FlapoHn
6 months ago
DenisMP